Description

All the parts required to put together a Scale Military Style Trailer.

There are two versions of this kit. One is Self Assembly, you assemble all the parts yourself.
The second is Fully Assembled, I do all the work for you and send you a Fully Assembled Scale Body.

All parts have been 3D printed with a high quality PLA Filament that I use for my own printing requirements resulting in a lot of detail and making all parts fit together very easily once final preparation has been done.

All parts have had most of the excess print materials, (print supports etc) removed and initial sanding done. Some parts may show grey or dark patches. This is normal when using wet sanding to remove the access support material and does not affect the parts and does not show through paint.

As with all 3D printed parts, you will need to do some sanding and possible filling so you will need to do the final sanding and filling, before assembly and painting, to achieve the finish you require.

Most paints will take to the PLA well, I use Water Base Acrylics and a final spray of Clear Acrylic.

If lights are being installed you will also need to drill appropriate holes in the Fenders or Rear of the trailer. (no light brackets/holes are in the parts as there are so many types of LED lights it is better for you to create the holes to suit the lights you are using.)

Once you have done the final preparations, all the parts will go together easily and can be customized as you would like.

I would recommend using Cyanoacrylate (model superglue) to glue the parts together and/or small screws.

Approximate Size:

Length: Aprox 10.1/2inches

Width: Aprox 7.1/4 inches

Hight: Aprox 4.3/4inches (without wheels)

Parts Included:

Trailer Body:

2 Part Trailer Bed:

2 x End Parts

2 x Fenders

Reflectors

Trailer Chassis & Suspension:

2 x 1.9inch Scale Outer Rims

2 x 1.9inch Scale Inner Rims

Nuts & Bolts For Scale Rims

2 x 1.3/8inch (1/12 Scale) Wheels & Tiers (style may change depending on stock available)

2 Part Frame

‘A’ Frame

4 x Suspension Brackets

2 x Leaf Springs

Axle Housing

Axle (requires cutting to length)

Nuts for axle

Tow Hitch Parts

Cross Bar