Description

All the parts required to put together a Scale Dodge Ram Pickup Body.

There are two versions of this kit. One is Self Assembly, you assemble all the parts yourself.
The second is Fully Assembled, I do all the work for you and send you a Fully Assembled Scale Body

All parts have been 3D printed with a high quality PLA Filament that I use for my own printing requirements resulting in a lot of detail and making all parts fit together very easily once final preparation has been done.

This Hard Body Kit includes a Detailed Cab Interior with detailed Dash and side panels. Clear Styrene Sheet is also included for windows along with Clear 3D printed Headlights.

All parts have had most of the excess print materials, (print supports etc) removed and initial sanding done. Some parts may show grey or dark patches. This is normal when using wet sanding to remove the access support material and does not affect the parts and does not show through paint.

As with all 3D printed parts, you will need to do some sanding and possible filling so you will need to do the final sanding and filling, before assembly and painting, to achieve the finish you require.

Most paints will take to the PLA well, I use Water Base Acrylics and a final spray of Clear Acrylic.

If lights are being installed you will also need to drill appropriate holes in the light buckets. (no light brackets/holes are in the parts as there are so many types of LED lights it is better for you to create the holes to suit the lights you are using.)

Once you have done the final preparations, all the parts will go together easily and can be customized as you would like.

I would recommend using Cyanoacrylate (model superglue) to glue the parts together and/or small screws.

Approximate Size:

Length: Aprox 19inches

Width: Aprox 7 inches

Hight: Aprox 5.1/2inches (without wheels)

Wheelbase: Aprox 12inches measured from centre front wheel arch to centre rear wheel arch

Parts Included:

CAB:

Cab Frame:

Roof:

Left/Right Doors:

Left/Right Side Windows:

3 x ‘POWER RAM’ Badges:

FRONT:

Hood:

Left/Right Fenders:

Behind Grill Plate:

Grill:

Front Bumper:

CAB INTERIOR:

Dash:

Steering Wheel:

Seat/Floor/Interior Door Panels:

2 x Frame Rails:

REAR BED:

Left/Right Inner Bed Parts

Bed Front Bulkhead:

Left/Right Outer Bed Fenders:

Outer Tailgate:

Inner Tailgate:

Under Tailgate Bar:

Roll Bar: