Description

All the parts required to put together a Scale Jeep Rubicon Body.

There are two versions of this kit. One is Self Assembly, you assemble all the parts yourself.
The second is Fully Assembled, I do all the work for you and send you a Fully Assembled Scale Body.

All parts have been 3D printed with a high quality PLA Filament that I use for my own printing requirements resulting in a lot of detail and making all parts fit together very easily once final preparation has been done.

All parts have had most of the excess print materials, (print supports etc) removed and initial sanding done. Some parts may show grey or dark patches. This is normal when using wet sanding to remove the access support material and does not affect the parts and does not show through paint

As with all 3D printed parts, you will need to do some sanding and possible filling so you will need to do the final sanding and filling, before assembly and painting, to achieve the finish you require.

Most paints will take to the PLA well, I use Water Base Acrylics and a final spray of Clear Acrylic.

If lights are being installed you will also need to drill appropriate holes in the grill light buckets and rear bed. (no light brackets/holes are in the parts as there are so many types of LED lights it is better for you to create the holes to suit the lights you are using.)

Once you have done the final preparations, all the parts will go together easily and can be customized as you would like.

I would recommend using Cyanoacrylate (model superglue) to glue the parts together and small screws for the truck bed.

Clear 3D printed Light lenses are in the kit as well as a sheet of clear card for all windows.

There is a lot of parts and detail in this body kit and room for a whole lot of mods and customization.
For example, the roof is in two parts giving you the option to fit just the front part and leave the rear open.

Approximate Size:

Once assembled, the body will fit most 1/10 scale crawlers

Length: Aprox 42cm

Width: Aprox 16cm

Hight: Aprox14cm

Wheelbase: Aprox 34cm When measured from centre front wheel arch to centre rear wheel arch

In the kit you will find:

2 Front Doors
2 Rear Doors
1 Tailgate Door
2 Front Fenders
2 Rear Fenders
2 Mid Panels
2 Rear ¼ Panels
1 Windshield Frame
1 Front Vent Panel
1 Rear Window Frame
1 Hood
1 Grill
1 Two Part Roof
2 Font Wheel Arches
2 Rear Wheel Arches
1 Front Bumper
1 Front Bumper ‘V’ Bar
1 Rear Bumper
1 Tow Hitch Mounting Plate

Small Parts:

4 Clear Front Lights
2 Rear Light Mounts
Clear Rear Light Lenses
2 Side Mirrors
2 Side Mirror Frames
2 Side Mirror Mounts
6 Door Handles
8 Simulated Hinges (for Hood and doors)
2 Large simulated Hinges (for Rear Door)